The improvement of interrupted life kneading depends on the use and maintenance of ideal connections in design, manufacturing, and subsequent processes. Depends on a unique connection and ineffective purpose, ultimately. By combining multiple aspects of trust, it can improve the lifespan of the mold

Not only does it meet the temperature requirements, but it is very important that the heated kneading does not penetrate the core (placed in the mold heating furnace). During the trial calculation process, kneading should focus on the following aspects:

Determine the mold temperature before this kneading rod. There must be a certain temperature gap between the aluminum core mold and this mold

It is necessary to align 2 in a kneaded mold to prevent folding, insertion, and appearance interruption

3. If the interruption is not the same, it is necessary to choose an appropriate kneading speed that is too fast to prevent the formation of discharge from being unstable

4. We also hope to pay attention to the quality of the aluminum rod and prevent the kneading process to prevent impurities in the aluminum rod that cause mold folding loss, etc

But it is the power of this design that will be valued. The maintenance service model is a very important link. To ensure the strength of the mold according to the maintenance service mode. The last layer that is usually not used is attributed to welding, and the welding arrangement has a serious impact on the interruption of service life. Especially with welding operations, shortening the lifespan of this form is very simple. In this corrected speed configuration file, it is usually used to quickly slow down this local maintenance service and not choose to slow down local resistance. So far, the indirect costs of the mold structure may guarantee its lifespan at a certain level. Of course, improving the level of maintenance service design and reducing the number of testing methods is one of the ways to improve service life

Additional attention should be paid to this link. The process of boiling the pot. Especially for a screw with a loophole or weaker local machine, otherwise it would be a very simple blow to this mold

Prevent boiling and local operations. Before placing the mold. The calling process of aluminum core container molds should be cautious. It is necessary to wash thoroughly, carefully, and thoroughly inspect this mold, without any fines or malfunctions